How to Replace a Saab 9-3 Key
The Saab 9-3 has a great variety of appeal to drivers. It has a powerful engine as well as good visibility. It also has an excellent safety rating.
However, it's important to make sure that you have at least two keys that work for your vehicle. It is costly to replace a key in the event that you lose it.
How to Replace the Ignition Key on a Saab 9-3
If your car's key doesn't start in the ignition, you need to replace it. This guide will show how to replace the ignition key on the Saab 9-3. You'll require a replacement key with a reprogrammable battery and a brand new key-fob case.
Unlike older models, most modern Saab automobiles use a transponder on the key-fob instead physical metal key to unlock and start the vehicle. The reprogrammable batteries inside the key-fob will eventually wear out, and they aren't able to hold any charge. This is particularly the case if you use the same key for the same lock.
A professional locksmith can change the battery quickly. If you have the proper tools and patience, you can do it yourself. The first step is to remove the key-fob off. This is accomplished by inserting a flathead screwdriver into the slot that is located in the middle of the case. You must work slowly, as the plastic is extremely thin and can easily be damaged.
Once the case is open, you can prepare the new key by combining the lower half of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is mated to the CIM properly, which could make a big difference when replacing the original key for your Saab 9-3.
How do G28CarKeys replace the ignition Key in a Saab 900
If you do not have two keys, you will have to take off the steering wheel and dashboard to gain access to the ignition. Start by disconnecting your negative battery cable. Once the battery is disconnected, you are able to remove the dashboard and trim pieces around the steering wheel. After the dashboard has been removed, you can place screws into the hole behind the ignition switch.
The ignition cylinder has key locks that can stop the vehicle from starting if key isn't present in the. If the ignition switch of your 900 isn't working, look at the key to see whether it's in the lock or snared into the barrel of the ignition. It's also a good idea to rotate your keys on a regular basis and keep them clean to ensure that they don't get bent.
Saab cars are different from other vehicles in that they don't have traditional keys made of metal. Instead, the car detects the electronic signals generated by the key fob through a chip that is specifically designed for it.
If you lose your sole working key fob the dealer will charge you the highest dollar to replace the computer module (known as the CIM). However, we can reprogram the existing computer EEPROM and prepare it to accept new keys without replacing it. You'll save up to 50% off the dealer's price! We call it the SAAB Key PROGRAM. Find out more information about it here!
How to replace the ignition Key in the Saab9-5
The metal component of a traditional Saab key is simple to copy, and not a major obstacle against vehicle theft. The real protection comes from the electronic part that's in the key fob, which has a chip inside that recognizes your car when it is inserted into the ignition switch.
Saab's anti-theft system has relied upon this technology for more than a decade. It's not as efficient as a physical lock for your door, but it makes stealing your car a lot more difficult. Every Saab owner must keep an extra Saab key in their car.
The majority of new Saabs come with two keys. However, they can be added at a dealer using a special handheld device, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 vehicles, which come with newer, more modern features that require a separate key-fob and utilize a different process.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules and charge an extra fee. However, we can reprogram the EEPROM on your computer and set it up to accept new keys, and not replace the expensive modules.
How do I replace the ignition Key on an XC90 Saab
If your SAAB 9-3 key fob starts having problems turning the barrel of the lock It could be the time to replace it. The process is simple and you don't even need to visit a dealer. Instead you can do it yourself at home using only a few tools.
The first step is to prepare the new key. Before you begin, disable the anti-theft feature by placing blocks underneath your rear wheels, and then releasing your handbrake. Insert the key in the ignition, and then turn it to the "on" position. This will activate the accessories, but will not start the engine. Repeat this process 5 times, and then keep the key on the "on" position.
The next step is to purchase a new case for your old key fob. They can be found at a variety of auto parts stores and are usually extremely affordable. They can be purchased without electronics depending on the model.
To open up the case, put a flathead screwdriver in the slot that is in the middle, and gently work it. After you have split the case, you will have access to all the internal electronic components. To remove the electronics employ a small screwdriver and attempt to pull them out gently.